Screenshot API Pricing Comparison (2026)

Side-by-side pricing comparison of 10 screenshot APIs. Per-screenshot costs at 1K, 10K, 50K, and 100K volumes. Free tiers, overage billing, and hidden costs explained.

Vitalii Holben Updated

Picking a screenshot API based on features alone gets you halfway. The other half is figuring out what it actually costs at the volume you need. Most APIs publish a pricing page, but comparing them is tedious — different tier structures, different units, different overage rules. Some charge per render, some per credit, some auto-upgrade you to the next tier when you go over.

I pulled the current pricing (November 2026) from ten screenshot APIs and ScreenshotRun, then calculated the per-screenshot cost at four different volumes: 1,000, 10,000, 50,000, and 100,000 captures per month. The numbers below come directly from each provider's public pricing page.

The pricing table

Provider Free tier Cost at 1K/mo Cost at 10K/mo Cost at 50K/mo Cost at 100K/mo
ScreenshotRun 200/mo $9 (3K incl.) $29 (15K incl.) $79 $119
ScreenshotOne 100/mo $17 (2K incl.) $79 (10K incl.) $259 $259 + overage
Urlbox None (trial) $19 (2K incl.) $99 (15K incl.) $498+ $498+
APIFlash 100/mo $7 (1K incl.) $35 (10K incl.) $180 (100K incl.) $180
CaptureKit 100/mo $7 (1K incl.) $29 (10K incl.) $89 (50K incl.) $89 + overage
Microlink ~750/mo $49 (46K incl.) $49 $49 Custom
Screenshotlayer 100/mo* $19.99 (10K incl.) $19.99 $59.99 (30K) or $149.99 (75K) $149.99 + overage
Screenshot Machine 100/mo €9 (2.5K incl.) €59 (20K incl.) €99 (50K incl.) €99 + overage
Browshot 100/mo $10 (1K credits) $50 (8K) or $100 (20K) $500 (125K credits) $1,000 (300K credits)
Restpack None (trial) $9.95 (1K incl.) $39.95 (10K incl.) $99.95 (40K) + overage $499.95 (300K incl.)

*Screenshotlayer's free tier is restricted to non-commercial use.

A few patterns stand out. At low volumes (under 3,000/month), the price gap between providers is narrow — $7 to $19. The gap widens fast at scale. At 50,000 screenshots per month, ScreenshotRun costs $79 versus $259 at ScreenshotOne or $498+ at Urlbox. At 100,000 captures, the spread is even wider: $119 (ScreenshotRun) versus $500-$1,000 at Browshot or Restpack.

Per-screenshot cost breakdown

The monthly price only tells part of the story. What matters for budgeting is the cost per individual screenshot at your expected volume.

Provider Per-shot at 1K Per-shot at 10K Per-shot at 50K Per-shot at 100K
ScreenshotRun $0.003 $0.0019 $0.0016 $0.0012
APIFlash $0.007 $0.0035 $0.0018* $0.0018*
CaptureKit $0.007 $0.0029 $0.00178 ~$0.00178+
Screenshotlayer $0.002* $0.002 $0.002 $0.002
Screenshot Machine €0.0036 €0.00295 €0.00198 €0.00198+
ScreenshotOne $0.0085 $0.0079 $0.0052 $0.0052+
Urlbox $0.0095 $0.0066 ~$0.003 ~$0.003
Restpack $0.00995 $0.003995 $0.0025 $0.00167
Browshot $0.01 $0.00625 $0.004 $0.0033
Microlink $0.049 $0.0049 $0.00107 Custom

*APIFlash's 100K price requires the $180/mo Large plan. Screenshotlayer's $0.002 per-shot comes with a limited feature set (no geolocation, no advanced rendering options).

ScreenshotRun has the lowest per-screenshot cost at every volume tier except the 1K level, where Screenshotlayer's flat $0.002 rate undercuts (but with significant feature limitations). At 10K and above, ScreenshotRun's pricing pulls ahead of every competitor.

What the price actually gets you

Cheap screenshots that come back broken are worth nothing. The per-unit cost only matters when the API reliably handles difficult sites. The table below shows where providers differ in what their base price includes:

Feature ScreenshotRun ScreenshotOne Urlbox APIFlash CaptureKit
Full-page capture All plans All plans All plans All plans All plans
Stealth mode All plans Growth ($79+) All plans Enterprise only All plans
Geolocation All plans Growth ($79+) All plans Enterprise only All plans
Ad blocking All plans All plans All plans All plans All plans
CSS/JS injection All plans All plans All plans Paid plans All plans
PDF export All plans All plans All plans All plans All plans
Dark mode All plans All plans All plans Paid plans All plans
Scroll video All plans Growth ($79+) $99+ No No
Page analysis All plans No No No No

ScreenshotOne gates geolocation and stealth mode behind their $79/month Growth plan. That means if you need to screenshot a site that blocks bots (which is most major sites in 2026), the cheapest ScreenshotOne option is actually $79 — not the $17 Basic plan. Same story with APIFlash: geolocation and proxy support are Enterprise-only, with no published price.

Urlbox includes everything in all plans but has no free tier and starts at $19/month. Their per-screenshot cost stays above $0.006 until you hit custom enterprise pricing.

Free tiers worth considering

If you're evaluating APIs or running a hobby project, the free tier matters. This is what each provider offers without a credit card:

Provider Free screenshots Limitations
ScreenshotRun 200/mo All features included
Microlink ~750/mo 25/day rate limit, shared infrastructure
ScreenshotOne 100/mo No geolocation, no stealth, no video
APIFlash 100/mo All features included
CaptureKit 100/mo All features included
Browshot 100/mo Shared browsers, lower priority
Screenshotlayer 100/mo Non-commercial use only
Screenshot Machine 100/mo Basic features only
Urlbox 0 (7-day trial) No free tier
Restpack 0 (7-day trial) No free tier

Microlink gives the most free screenshots, but the 25-per-day cap means you can't use them in bursts. ScreenshotRun's 200/month free tier is the highest among dedicated screenshot APIs that include all features (stealth, geo, full-page, PDF) without restrictions.

Overage billing: what happens when you exceed your plan

Overage handling varies widely and can turn a cheap plan expensive overnight if you're not careful.

ScreenshotRun charges per-screenshot overages that decrease with plan level: $0.009 per extra capture on Starter, dropping to $0.003 on Business. You can set a hard cap in the dashboard to prevent surprise bills.

Urlbox auto-upgrades you to the next tier when you exceed your limit. If you're on the $49 plan and cross 5,000 renders, your bill jumps to $99 for that month. No partial billing.

APIFlash takes the opposite approach — when you hit your limit, the API stops responding. No overages, no warnings in advance. Good for budget control, bad if your production pipeline depends on the screenshots.

ScreenshotOne bills overages at their published per-screenshot rates. Browshot uses a credit system where you buy credits in bulk — once credits run out, you top up manually. No automatic billing, no auto-cutoff.

Hidden costs to watch for

The monthly fee isn't always the full picture. A few pricing traps show up across the industry:

Feature gating. ScreenshotOne and APIFlash lock important features behind higher tiers. Stealth mode on ScreenshotOne requires the $79 Growth plan. If you're comparing their $17 Basic against ScreenshotRun's $9 Starter and your target sites use bot detection, the comparison is misleading — you'd need their $79 tier to get equivalent functionality.

Currency mismatch. Screenshot Machine prices in EUR, not USD. At current exchange rates (November 2026), their €99 Enterprise plan is roughly $107. Not a huge difference, but it shifts the comparison when you're budgeting in dollars.

Cache counting. Some providers don't count cached responses against your quota (Urlbox, Screenshot Machine). Others do. If you're repeatedly screenshotting the same URLs, a provider that excludes cache hits from your quota effectively gives you more screenshots per dollar.

Support tiers. Screenshotlayer charges $479.88/year for dedicated support as an add-on. Restpack gives faster response times only on Business+ ($99.95/mo). ScreenshotRun includes email support on all plans.

Which plan makes sense at each volume

Rather than declaring a single "best" provider, the right choice depends on volume and feature needs:

Under 200 screenshots/month: ScreenshotRun's free tier covers it. All features included, no credit card needed.

1,000-3,000/month: ScreenshotRun at $9 or CaptureKit/APIFlash at $7. If you don't need stealth or geo, APIFlash's $7 Lite plan works. If you do (and you probably will for sites like Reddit or LinkedIn), ScreenshotRun's $9 Starter includes everything.

10,000-15,000/month: ScreenshotRun at $29 is the clear value pick. CaptureKit matches at $29 for 10K. ScreenshotOne needs $79 for 10K with stealth. Urlbox needs $99 for 15K.

50,000+/month: ScreenshotRun's $79 Growth or $119 Business. At this volume, the annual savings over Urlbox ($498) or ScreenshotOne ($259) are significant — $2,000-$5,000 per year.

100,000+/month: ScreenshotRun at $119 is the lowest published price for this volume. APIFlash's $180 Large plan covers 100K. Everyone else either requires custom pricing or costs $500+.

For a full feature comparison beyond pricing, see our best screenshot API comparison.

FAQ#

At 100,000 screenshots per month, ScreenshotRun costs $119/mo ($0.0012 per screenshot). The next cheapest published price is APIFlash at $180/mo for 100K captures. Most other providers require custom enterprise pricing above 50K.

ScreenshotRun offers 200 free screenshots per month with all features included. ScreenshotOne, APIFlash, CaptureKit, Browshot, Screenshotlayer, and Screenshot Machine each offer 100 free screenshots per month. Microlink offers about 750 per month but rate-limited to 25 per day. Urlbox and Restpack have no free tier, only 7-day trials.

No. ScreenshotOne gates stealth mode and geolocation behind their $79/month Growth plan. APIFlash restricts proxy and geo features to Enterprise-only pricing. ScreenshotRun and CaptureKit include stealth mode on all plans including free.

It depends on the provider. ScreenshotRun charges per-screenshot overages with a configurable hard cap. Urlbox auto-upgrades you to the next plan tier. APIFlash stops responding when you hit the limit. Browshot uses a manual credit top-up system. Each approach has tradeoffs between cost control and uptime.

Most providers price in USD. Screenshot Machine prices in EUR, which can shift the comparison depending on exchange rates. Browshot uses a USD credit system. Always check the currency on the provider pricing page before comparing.

Written by

Vitalii Holben

Co-founder and CEO of ScreenshotRun. Full-stack developer building screenshot API tools that help developers capture, automate, and monitor web pages at scale. Based in Europe, shipping code since 201...

Screenshot API in a few clicks

Free plan includes 200 screenshots every month. No credit card required.

Sign up → copy your key → make your first call